The gowning rack features 14-gauge hanger rails with slots spaced on standard 3″ (76 mm) centers, designed to retain gowns in a fixed position while allowing hangers (not included) to swing front-to-back without moving left-to-right, facilitating smoother laminar flow compared to traditional square hanger rails. Vertical supports are constructed from heavy gauge Type 304 stainless steel, utilizing 1½” (38 mm) square tubing that is fully welded, ground, and polished to its original finish.
Each unit is equipped with four adjustable feet designed to dissipate static charge. The horizontal supports are bolted to the vertical uprights with stainless steel bolts and constructed from 1″ (25 mm) O.D. Type 304 stainless steel tubing, accompanied by a heavy gauge stainless steel backing plate. The bolts are covered with stainless steel caps to eliminate crevices where dust might accumulate. The hanger rail is also made from heavy gauge Type 304 stainless steel, with hanger slots located every 3″ (76 mm) along its length, and other spacing options are available. The standard nylon dissipative feet have a diameter of 2″ (51 mm) and offer ½” (13 mm) adjustability, with optional foot plates available to affix the gowning rack to the floor.