HYPO-CHLOR® Neutral Products are a ready-to-use and neutralized 0.52% and 0.25% sodium hypochlorite solutions formulated with Water for Injection (WFI). HYPO-CHLOR Neutral 0.52% & 0.25% have been designed for all pharmaceutical, biopharmaceutical, biotechnology, health care, medical device, and diagnostic manufacturing facilities that demand a neutral pH sodium hypochlorite solution adequate for maintaining a clean and critical environment. HYPO-CHLOR Neutral Products are enhanced sodium hypochlorite cleaners for use on cleanroom surfaces with reduced consequences of corrosion, pitting, and rusting. HYPO-CHLOR Neutral Products are compatible with most non-porous hard surface materials and are safe to use daily on stainless steel surfaces. HYPO-CHLOR Neutral Products are available sterile or non-sterile in a SimpleMix 16 oz trigger spray and a SimpleMix 1 gallon container. The SimpleMix® System allows for exact and fresh solutions each and every time without handling the activator or sodium hypochlorite solution. When used per SimpleMix System directions, HYPO-CHLOR Neutral 0.52% & 0.25% solutions are neutralized via the attached activator when it is required for use.
HYPO-CHLOR Neutral
In Stock
Use the filters below to view all product variations.
No items found for your selection.
HYPO-CHLOR Neutral Specifications
| Product Number | Description | Quantity | Add to Quote |
|---|---|---|---|
| Product Number:C-SHC-NPH-0.25-02 | Description:HYPO-CHLOR Neutral 0.25% | Quantity:4/Case | |
| Product Number:C-SHC-NPH-0.25-16Z | Description:HYPO-CHLOR Neutral 0.25% | Quantity:12/Case | |
| Product Number:C-SHC-NPH-0.52-16Z | Description:HYPO-CHLOR Neutral 0.52% | Quantity:12/Case | |
| Product Number:C-SHC-NPH-0.52-02 | Description:HYPO-CHLOR Neutral 0.52% | Quantity:4/Case |
- Formulated with Water for Injection
- Filled in an ISO 5 (Grade A/B, Former Class 100)
- Filtered at 0.2 microns
- Components are air washed with 0.2 micron filtered air
- Aseptically filled into sterile components via gamma irradiation
- Lot sterility tested according to current USP compendium
- Completely traceable from start to finish
- Each sterile container is double bagged packaged
- Quadruple bagged in the ABCD Cleanroom Introduction System®
- Individually labeled with lot number and expiration
- Delivered with lot specific Certificate of Analysis and Certificate of Sterility
- Available in two ready-to-use concentrations: 0.25% and 0.52%
- Available in 1 gallon and 16 oz SimpleMix containers
- Effective for up to 24 hours post activation
- Enhanced cleaning applications over a standard sodium hypochlorite solution
- Increased cleaning surface compatibility
- Neutralized sodium hypochlorite reduces corrosion, rusting, and pitting of cleanroom surfaces
- Designed for all washable non-porous environmental surfaces
