HYPO-CHLOR Neutral


Description

HYPO-CHLOR® Neutral Products are a ready-to-use and neutralized 0.52% and 0.25% sodium hypochlorite solutions formulated with Water for Injection (WFI). HYPO-CHLOR Neutral 0.52% & 0.25% have been designed for all pharmaceutical, biopharmaceutical, biotechnology, health care, medical device, and diagnostic manufacturing facilities that demand a neutral pH sodium hypochlorite solution adequate for maintaining a clean and critical environment. HYPO-CHLOR Neutral Products are enhanced sodium hypochlorite cleaners for use on cleanroom surfaces with reduced consequences of corrosion, pitting, and rusting. HYPO-CHLOR Neutral Products are compatible with most non-porous hard surface materials and are safe to use daily on stainless steel surfaces. HYPO-CHLOR Neutral Products are available sterile or non-sterile in a SimpleMix 16 oz trigger spray and a SimpleMix 1 gallon container. The SimpleMix® System allows for exact and fresh solutions each and every time without handling the activator or sodium hypochlorite solution. When used per SimpleMix System directions, HYPO-CHLOR Neutral 0.52% & 0.25% solutions are neutralized via the attached activator when it is required for use.

Features

  • Formulated with Water for Injection
  • Filled in an ISO 5 (Grade A/B, Former Class 100)
  • Filtered at 0.2 microns
  • Components are air washed with 0.2 micron filtered air
  • Aseptically filled into sterile components via gamma irradiation
  • Lot sterility tested according to current USP compendium
  • Completely traceable from start to finish
  • Each sterile container is double bagged packaged
  • Quadruple bagged in the ABCD Cleanroom Introduction System®
  • Individually labeled with lot number and expiration
  • Delivered with lot specific Certificate of Analysis and Certificate of Sterility
  • Available in two ready-to-use concentrations: 0.25% and 0.52%
  • Available in 1 gallon and 16 oz SimpleMix containers
  • Effective for up to 24 hours post activation
  • Enhanced cleaning applications over a standard sodium hypochlorite solution
  • Increased cleaning surface compatibility
  • Neutralized sodium hypochlorite reduces corrosion, rusting, and pitting of cleanroom surfaces
  • Designed for all washable non-porous environmental surfaces

Product Numbers

C-SHC-NPH-0.25-02

4/Case HYPO-CHLOR Neutral 0.25%

C-SHC-NPH-0.25-16Z

12/Case HYPO-CHLOR Neutral 0.25%

C-SHC-NPH-0.52-16Z

12/Case HYPO-CHLOR Neutral 0.52%

C-SHC-NPH-0.52-02

4/Case HYPO-CHLOR Neutral 0.52%

HYPO-CHLOR Neutral Certificate Request

HYPO-CHLOR Neutral Information Request

HYPO-CHLOR Neutral Request